bbct
06-19 11:12 AM
I just sent you a PM also.
I am not on EAD but on H1-B. I have a approval notice until 09/30/2010, but did not got the visa stamped. How should I replace "the EAD" portion in the letter?
Thanks
I am not on EAD but on H1-B. I have a approval notice until 09/30/2010, but did not got the visa stamped. How should I replace "the EAD" portion in the letter?
Thanks
wallpaper arry onds head before after.
perm2gc
05-22 04:12 PM
When the one of the IV leaders is seriously considering going out of status in order to benefit from the great amnesty, you know that something is seriously messed up. Even so, I didn't expect you guys to be the first ones to give up...
Didn't you read the bill. They didn't give up but asking our fellow 400,000 highly skilled immigrants to wakeup and be part of our struggle.Many people i talked don't know about the bill itself.What a pitty !!!:mad:
Didn't you read the bill. They didn't give up but asking our fellow 400,000 highly skilled immigrants to wakeup and be part of our struggle.Many people i talked don't know about the bill itself.What a pitty !!!:mad:
EndlessWait
05-13 04:14 PM
I and my wife applied for I485(EB3) in July 2007. We both have got our EADs, but not used it.
My H1 is valid till May 2009. I have I140 approved and have got my H1(3 years) till May 2009.
My wife has her own H1b valid till Dec 2008.
We are planning to get divorced. i have applied for Divorce in India in this month (may 2008).
Is there a way I can cancel my 485 application. Because If i get my green card it will be difficult for me to marry girl from India.
My wife has mentioned that she will be applying for Divorce in USA.
Can I withdraw my 485 application and just be on H1 and wait for applying later. I do not care about GC.
i dont mean to give u advice on patch up..but from 485 perspective ..put ur future marriage plans on hold for a short while or atleast until u get ur gc...
if ur dependant, then go ahead..otherwise u dont need to cancel ur 485 even if u get divorce
My H1 is valid till May 2009. I have I140 approved and have got my H1(3 years) till May 2009.
My wife has her own H1b valid till Dec 2008.
We are planning to get divorced. i have applied for Divorce in India in this month (may 2008).
Is there a way I can cancel my 485 application. Because If i get my green card it will be difficult for me to marry girl from India.
My wife has mentioned that she will be applying for Divorce in USA.
Can I withdraw my 485 application and just be on H1 and wait for applying later. I do not care about GC.
i dont mean to give u advice on patch up..but from 485 perspective ..put ur future marriage plans on hold for a short while or atleast until u get ur gc...
if ur dependant, then go ahead..otherwise u dont need to cancel ur 485 even if u get divorce
2011 arry bonds before and after. arry onds head efore and
hmehta
07-27 01:11 PM
Urgency of getting a receipt is that once you get the receipt, it means that USCIS has 'accepted' your application and it will not be rejected for lack of initial evidence.
Why do you keep calling them everyday? What is the urgency of getting receipts?
Why do you keep calling them everyday? What is the urgency of getting receipts?
more...
TomPlate
02-28 11:37 AM
Are they going to approve cases which was filed during July 2007 with 2006 or 2007 priority dates, if they fall under namecheck issue.
Please share your thoughts on this.
Please share your thoughts on this.
venanu
06-19 03:43 PM
"Priority Date(PD) is valid for filing the 485..Whereas Receipt Date(RD) is the only one which is valid in the 485 stage..."...Can someone confirm this?
more...
Suva
01-15 06:27 PM
Check this... This covers maternity. Only thing you should get it before your wife become pregnant.
http://visitinsurance.com/VISIT_Incoming_Premiums.html
http://visitinsurance.com/VISIT_Incoming_Premiums.html
2010 arry bonds before and after
texcan
01-11 05:48 PM
1) Try state group insurance
Texas and for that matter every state has a group insurance coverage for folks
who donot get coverage from any other insurance provider.
This is a coverage that you will get for sure, only document you will need is a written paper from insurance company that one cant be insured.
Check the state insurance board website.
2) check free clinics, these clinics will provide complete care ( you can pay them if you like)if you dont thats fine too. I suggest paying them if you can even if its a bit high, as someone who cant afford may one day get to use this service too.
3) Ask yours employer's insurance agent, group insurances gurantee insurance.
Donot worry, life works in interesting ways. As last resort one can go to home country for delivery.
donot worry.
Texas and for that matter every state has a group insurance coverage for folks
who donot get coverage from any other insurance provider.
This is a coverage that you will get for sure, only document you will need is a written paper from insurance company that one cant be insured.
Check the state insurance board website.
2) check free clinics, these clinics will provide complete care ( you can pay them if you like)if you dont thats fine too. I suggest paying them if you can even if its a bit high, as someone who cant afford may one day get to use this service too.
3) Ask yours employer's insurance agent, group insurances gurantee insurance.
Donot worry, life works in interesting ways. As last resort one can go to home country for delivery.
donot worry.
more...
chanduv23
07-10 09:31 AM
The idea is - use this guy and expose media that gives false news or that supresses real issues and force those types of media to bring our issue to limelight.
I have heard all media saying "We are immigrant nation", "we need skilled immigrants", "'We are not racist", etc.. then again the same media says "Immigrants are overstaying visas", "There is quota, we cannot do anything", same media has supressed microsoft's news about the Canada development center just because it involved immigration.
I am of a strong opinion that media is controlled by politicians, the reporters who said they will cover the flower campaign - chances are that their bosses may ask them not to or give them another assignment ???
I have heard all media saying "We are immigrant nation", "we need skilled immigrants", "'We are not racist", etc.. then again the same media says "Immigrants are overstaying visas", "There is quota, we cannot do anything", same media has supressed microsoft's news about the Canada development center just because it involved immigration.
I am of a strong opinion that media is controlled by politicians, the reporters who said they will cover the flower campaign - chances are that their bosses may ask them not to or give them another assignment ???
hair arry bonds head before after.
bekugc
12-28 04:19 PM
Omm,
as mammoy has indicated, if u quit before 140 approval, and u get RFE; if there is no employer cooperation ( for whatever reason) . u can be in trouble.
better stay with ur curent employer until it get approved. move if u have to to a different client; if u want to stay in ur existing client , try to negotiate if they can continue u on a lower billing rate. take a cut for now as long as its still above ur h1 prevailing wage etc.
as mammoy has indicated, if u quit before 140 approval, and u get RFE; if there is no employer cooperation ( for whatever reason) . u can be in trouble.
better stay with ur curent employer until it get approved. move if u have to to a different client; if u want to stay in ur existing client , try to negotiate if they can continue u on a lower billing rate. take a cut for now as long as its still above ur h1 prevailing wage etc.
more...
princeusa2006
08-11 05:07 PM
Can anyone tell what will be the status of a person who has used AC21 , and does not get the EAD renewal before the existing EAD expires ? Assume 140 has been approved, 180 days has been passed and got the EAD renewal receipt.
hot Barry Bonds Head Before And
scorpion00
06-16 11:26 PM
I support this campaign and will act upon any action item.One quick question, is the visa revalidation only for people who already hold H1 visa stamp on passport or COS from F1-H1 also falls in the same category?
more...
house Barry Bonds Fat Head! Look how big his head is it just sad.
actaccord
01-31 08:56 AM
to find anything related to the patent in uspto.gov
Ms Su of TVU....why would someone stoop so low and looks like she became a convenient scapegoat for the students ..? not sure what'd you think. She has a Phd from UC Berkley and a patent on her name ....several publications.
I dug up her resume...
Dr. Susan Xiao-Ping Su
President of Tri-Valley University
Tri-Valley University TVU (http://trivalleyuniversity.org)
E-mail: ssu@trivalleyuniversity.org, su123@sbcglobal.net
EDUCATION
Ph .D. Department of Mechanical Engineering, University of California at Berkeley, 2001.
Major: Design; Minor I: Microscale Heat Transfer; Minor II: Integrated Circuit Technology.
Dissertation: Compliant Microleverage Mechanism Design for MEMS Application
Dissertation Advisors: Prof. Alice M. Agogino; Prof. Tsu-Jae King, Prof. Dennise K. Lieu
M. S. Department of Mechanical and Aeronautical Engineering, University of California at Davis, 1997. Major: Design
Thesis: Computer-Aided Kinematic and Dynamic Analysis of Spatial Mechanisms
Thesis Advisors: Prof. Harry H. Cheng; Prof. Bahram Ravani; Prof. An T. Yang (Emeritus)
B. S. Department of Engineering Mechanics, Tsinghua University, China, 1991.
Major Field of Study: Fluid Mechanics
WORK EXPERIENCE
1. President and Founder, Semiconductor System Integration, Pleasanton, 2003-present
� Consultant for Phosistor Technology, Pleasanton, on Semiconductor Device Fabrication, Development of photonic component (laser and OPM) process, Oxford Plasmalab DRIE and ICP etching of SiO2 for Optical MEMS devices.
� Consultant for California Micro Device on Chip-Scale-Packaging strengthen mechanism;
� Consultant for NASA on nano chemical sensor fabrication.
� High-density Magnetic Random Access Memory Development
2. Lecturer, HerGuan University, Sunnyvale, 2007
EE537 Analog IC Design, EE515 & 516 VLSI I & II
3. Lecturer, San Jose State University, San Jose, CA, Fall 2004-2006
EE178 Digital System Design with FPGA, ME 101 Dynamic
4. Lecturer, San Francisco State University, San Francisco, CA, 2004-2005;
ENGR 890 Design of MEMS; Design of CMOS Memory Circuit
ENGR 356 Computer Architecture; ENGR378 Digital System Design with Verilog.
5. Lecturer, International Technological University, Santa Clara, CA, 2004-2007
EEN967 Analog IC Design; EE 519 CMOS Memory Circuit Design; EE 511 VlSI I, II;
EEN 923 & 910 Semiconductor Physics & Devices; EEN 918 IC Fabrication Technology.
6. Lecturer, Northwestern Polytechnic University, Fremont, CA, 9/2002 -2004
EE 507 Analog IC Design; EE 520 CMOS Memory Circuit Design;
EE 506 VLSI II; EE 624 IC Fabrication Technology; EE 581 MEMS/NEMS Design;
Developing MEMS and nanotechnology concentration area curriculum.
7. Member of Technical Staff, Project manager, PicoNetics Inc., Fremont, 9/2000-9/2002.
� 256K 100MHz (TSMC 0.25m) and 4M 200MHz SRAM design (0.13m G logic process); RLC circuit for on-chip sin wave generation, sense amplifier fro SRAM, DRAM, Bandgap reference, voltage regulator, PLL circuit design, standard cell library design.
� Supervision of two layout engineers for a 256K SRAM circuit including all technical file set-up, layout optimization for minimum coupling and RC delay, Dracula LVS and Arcadia extraction, LVS and Extraction tools evaluation and memory compliers; UMC and TSMC 0.25, 0.18, 0.15 and 0.13 m process evaluation for SRAM.
8. Graduate Researcher, Berkeley Sensor and Actuator Center (BSAC), and Berkeley Expert Technology System Lab (BEST), U. C. Berkeley, 1996-2000.
� Design, fabrication and testing of a resonant accelerometer (RXL) with on-chip amplifier and two-stage leverage mechanism by the SOI-MEMS integrated process.
� Compliant micro-leverage mechanism design and analysis, FEM analysis and simulation with ABAQUS and SUGAR; Design of the mechanism for force and displacement amplification in other MEMS devices including a micro-valve, an electrostatic actuator and the suspension of the disk drive.
9. Internship, Lawrence Berkeley National Lab, EETD, 6/1999-12/1999.
� Optics programming; SEM and TEM measurements of glass samples.
10. Graduate Researcher, Integrated Engineering and Mechatronics Lab, Dept. of Mechanical and Aeronautical Engineering, UC Davis, 1994-1996
� With Ch program, analysis of velocity and acceleration for 32 spatial mechanisms (4-bar, 5-bar, 6-bar and 7-bar); force and torque analysis of RCCC & RCRCR mechanisms;
� Designed a data acquisition system for PAS machine by communication of an AT-MIO-16F board in Labview.
GRADUATE THESIS ADVISING:
� Yaosong Tao, International Technological University, Ph.D. Thesis: RF MEMS Components for Communication Systems, 2004.
� Leo Huang, Northwestern Polytechnic University, M.S. Thesis, Contacting Printing Lithography for Polymeric Organic Light-Emitting Diode, 2005;
� Sam Shi, International Technological University, M.S. Thesis, A 8-bit Energy Recover Adder, 2005;
� Parthiv Pandya, International Technological University, M.S. Thesis: MRAM Core Cell Design and Optimization, 2004;
� Paisit Sriprataks, International Technological University, M.S. Thesis: MRAM Sensing Circuit Design, 2004;
� Balajee Premraj, International Technological University, M.S. Thesis: Design of an 8M MRAM, 2004;
� Raul Gali, Northwestern Polytechnic University, M.S. Thesis: Signal Process Circuit Design for a Resonant Accelerometer, 2003;
AWARDS and HONORS
� John H. Latoures Scholarship, Mechanical Engineering Department,U.C. Berkeley, 2001.
� Lankershim Awards, U.C. Berkeley, 2000
� National Science Foundation (NSF) Graduate Research Fellowship (1996-1999);
� American Associated University Woman (AAUW) Selected Professional Fellowship ,1995;
� University Fee Grant, UC Davis, 1994.
PUBLICATIONS
1. S. X. P. Su, H. S. Yang, Alice M Agogino, Resonant Accelerometer with a Two-Stage Microleverage Mechanism Fabricated by SOI-MEMS Technology, IEEE Sensors Journal, Vol.5, No.6 December 2005, p.1214-1223
2. An Sang Hou, Susan X. P. Su, Design of a Capacitive-Sensor Signal Processing System with High Accuracy and Short Conversion Time, Sensors and Actuators A: Physical, Volume 119, Issue 1, 28 March 2005, P.113-119
3. X-P S. Su, H. S. Yang, Analytical Modeling and FEM Simulation of Single-Stage Microleverage Mechanism, International Journal of Mechanical Sciences 44, 2217-2238, 2002.
4. X-P. S. Su, H. S. Yang, Two-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 22, 328-336, 2002.
5. X-P S. Su, H. S. Yang, Design of Compliant Microleverage Mechanism, Sensors and Actuators, A 87 146-156, 2001.
6. X-P S. Su, H. S. Yang, Single-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 21, 246-252, 2001
7. H. S. Yang, X-P S. Su and B. Bai, Strain Analysis in Uniaxial Tensile and Compression Testing of Anisotropic Materials, International Journal of Mechanical Sciences 42 (2000) 2395-2415.
PATENTS
1. Susan X. P. Su, �A Folded-MTJ MRAM Cell� U.S. Patent No. US60/994941, 2007
Ms Su of TVU....why would someone stoop so low and looks like she became a convenient scapegoat for the students ..? not sure what'd you think. She has a Phd from UC Berkley and a patent on her name ....several publications.
I dug up her resume...
Dr. Susan Xiao-Ping Su
President of Tri-Valley University
Tri-Valley University TVU (http://trivalleyuniversity.org)
E-mail: ssu@trivalleyuniversity.org, su123@sbcglobal.net
EDUCATION
Ph .D. Department of Mechanical Engineering, University of California at Berkeley, 2001.
Major: Design; Minor I: Microscale Heat Transfer; Minor II: Integrated Circuit Technology.
Dissertation: Compliant Microleverage Mechanism Design for MEMS Application
Dissertation Advisors: Prof. Alice M. Agogino; Prof. Tsu-Jae King, Prof. Dennise K. Lieu
M. S. Department of Mechanical and Aeronautical Engineering, University of California at Davis, 1997. Major: Design
Thesis: Computer-Aided Kinematic and Dynamic Analysis of Spatial Mechanisms
Thesis Advisors: Prof. Harry H. Cheng; Prof. Bahram Ravani; Prof. An T. Yang (Emeritus)
B. S. Department of Engineering Mechanics, Tsinghua University, China, 1991.
Major Field of Study: Fluid Mechanics
WORK EXPERIENCE
1. President and Founder, Semiconductor System Integration, Pleasanton, 2003-present
� Consultant for Phosistor Technology, Pleasanton, on Semiconductor Device Fabrication, Development of photonic component (laser and OPM) process, Oxford Plasmalab DRIE and ICP etching of SiO2 for Optical MEMS devices.
� Consultant for California Micro Device on Chip-Scale-Packaging strengthen mechanism;
� Consultant for NASA on nano chemical sensor fabrication.
� High-density Magnetic Random Access Memory Development
2. Lecturer, HerGuan University, Sunnyvale, 2007
EE537 Analog IC Design, EE515 & 516 VLSI I & II
3. Lecturer, San Jose State University, San Jose, CA, Fall 2004-2006
EE178 Digital System Design with FPGA, ME 101 Dynamic
4. Lecturer, San Francisco State University, San Francisco, CA, 2004-2005;
ENGR 890 Design of MEMS; Design of CMOS Memory Circuit
ENGR 356 Computer Architecture; ENGR378 Digital System Design with Verilog.
5. Lecturer, International Technological University, Santa Clara, CA, 2004-2007
EEN967 Analog IC Design; EE 519 CMOS Memory Circuit Design; EE 511 VlSI I, II;
EEN 923 & 910 Semiconductor Physics & Devices; EEN 918 IC Fabrication Technology.
6. Lecturer, Northwestern Polytechnic University, Fremont, CA, 9/2002 -2004
EE 507 Analog IC Design; EE 520 CMOS Memory Circuit Design;
EE 506 VLSI II; EE 624 IC Fabrication Technology; EE 581 MEMS/NEMS Design;
Developing MEMS and nanotechnology concentration area curriculum.
7. Member of Technical Staff, Project manager, PicoNetics Inc., Fremont, 9/2000-9/2002.
� 256K 100MHz (TSMC 0.25m) and 4M 200MHz SRAM design (0.13m G logic process); RLC circuit for on-chip sin wave generation, sense amplifier fro SRAM, DRAM, Bandgap reference, voltage regulator, PLL circuit design, standard cell library design.
� Supervision of two layout engineers for a 256K SRAM circuit including all technical file set-up, layout optimization for minimum coupling and RC delay, Dracula LVS and Arcadia extraction, LVS and Extraction tools evaluation and memory compliers; UMC and TSMC 0.25, 0.18, 0.15 and 0.13 m process evaluation for SRAM.
8. Graduate Researcher, Berkeley Sensor and Actuator Center (BSAC), and Berkeley Expert Technology System Lab (BEST), U. C. Berkeley, 1996-2000.
� Design, fabrication and testing of a resonant accelerometer (RXL) with on-chip amplifier and two-stage leverage mechanism by the SOI-MEMS integrated process.
� Compliant micro-leverage mechanism design and analysis, FEM analysis and simulation with ABAQUS and SUGAR; Design of the mechanism for force and displacement amplification in other MEMS devices including a micro-valve, an electrostatic actuator and the suspension of the disk drive.
9. Internship, Lawrence Berkeley National Lab, EETD, 6/1999-12/1999.
� Optics programming; SEM and TEM measurements of glass samples.
10. Graduate Researcher, Integrated Engineering and Mechatronics Lab, Dept. of Mechanical and Aeronautical Engineering, UC Davis, 1994-1996
� With Ch program, analysis of velocity and acceleration for 32 spatial mechanisms (4-bar, 5-bar, 6-bar and 7-bar); force and torque analysis of RCCC & RCRCR mechanisms;
� Designed a data acquisition system for PAS machine by communication of an AT-MIO-16F board in Labview.
GRADUATE THESIS ADVISING:
� Yaosong Tao, International Technological University, Ph.D. Thesis: RF MEMS Components for Communication Systems, 2004.
� Leo Huang, Northwestern Polytechnic University, M.S. Thesis, Contacting Printing Lithography for Polymeric Organic Light-Emitting Diode, 2005;
� Sam Shi, International Technological University, M.S. Thesis, A 8-bit Energy Recover Adder, 2005;
� Parthiv Pandya, International Technological University, M.S. Thesis: MRAM Core Cell Design and Optimization, 2004;
� Paisit Sriprataks, International Technological University, M.S. Thesis: MRAM Sensing Circuit Design, 2004;
� Balajee Premraj, International Technological University, M.S. Thesis: Design of an 8M MRAM, 2004;
� Raul Gali, Northwestern Polytechnic University, M.S. Thesis: Signal Process Circuit Design for a Resonant Accelerometer, 2003;
AWARDS and HONORS
� John H. Latoures Scholarship, Mechanical Engineering Department,U.C. Berkeley, 2001.
� Lankershim Awards, U.C. Berkeley, 2000
� National Science Foundation (NSF) Graduate Research Fellowship (1996-1999);
� American Associated University Woman (AAUW) Selected Professional Fellowship ,1995;
� University Fee Grant, UC Davis, 1994.
PUBLICATIONS
1. S. X. P. Su, H. S. Yang, Alice M Agogino, Resonant Accelerometer with a Two-Stage Microleverage Mechanism Fabricated by SOI-MEMS Technology, IEEE Sensors Journal, Vol.5, No.6 December 2005, p.1214-1223
2. An Sang Hou, Susan X. P. Su, Design of a Capacitive-Sensor Signal Processing System with High Accuracy and Short Conversion Time, Sensors and Actuators A: Physical, Volume 119, Issue 1, 28 March 2005, P.113-119
3. X-P S. Su, H. S. Yang, Analytical Modeling and FEM Simulation of Single-Stage Microleverage Mechanism, International Journal of Mechanical Sciences 44, 2217-2238, 2002.
4. X-P. S. Su, H. S. Yang, Two-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 22, 328-336, 2002.
5. X-P S. Su, H. S. Yang, Design of Compliant Microleverage Mechanism, Sensors and Actuators, A 87 146-156, 2001.
6. X-P S. Su, H. S. Yang, Single-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 21, 246-252, 2001
7. H. S. Yang, X-P S. Su and B. Bai, Strain Analysis in Uniaxial Tensile and Compression Testing of Anisotropic Materials, International Journal of Mechanical Sciences 42 (2000) 2395-2415.
PATENTS
1. Susan X. P. Su, �A Folded-MTJ MRAM Cell� U.S. Patent No. US60/994941, 2007
tattoo bathroom sign, Barry
hopefulgc
07-26 12:06 AM
I think he would want to see a locksmith to get the damaged "lever" rectified before he sees a doctor lest someone should compromise the lock and break in while he is away to see the doctor.
sorry i couldn't resist... all in the name of humor!:D
While a pray for your "lever"....i will suggest u see a doctor asap!!!
And I will also prescribe you channel all the pain into some positive energy by helping IV via contributions, volunteer work...and participatingin action items...all that is very rewarding!!! and will help you from going nuts, bananas and what have you!!
sorry i couldn't resist... all in the name of humor!:D
While a pray for your "lever"....i will suggest u see a doctor asap!!!
And I will also prescribe you channel all the pain into some positive energy by helping IV via contributions, volunteer work...and participatingin action items...all that is very rewarding!!! and will help you from going nuts, bananas and what have you!!
more...
pictures arry bonds before and after
sgupta33
01-24 03:00 PM
bump
dresses Re: Barry Bonds, then and now
ksircar
07-28 03:54 PM
Ignore it. Even I had the same problem. Goahead and certify.
I can not certify the form. Even if I certify it comes back with error and tells me to enter middle initial. Tried couple of times, but without any success.
Dos anyone has any idea?
Thanks.
I can not certify the form. Even if I certify it comes back with error and tells me to enter middle initial. Tried couple of times, but without any success.
Dos anyone has any idea?
Thanks.
more...
makeup like never efore,
new2gc
06-01 11:16 AM
Voted Aye!
girlfriend arry bonds before and after
gcseeker2002
03-03 03:23 PM
This is probably somebody playing a prank or worse somebody trying to cheat you...cannot imagine how though.....
We cannot assume anything till the OP comes back and lets us know what happened.
We cannot assume anything till the OP comes back and lets us know what happened.
hairstyles arry bonds head. arry onds head before after.
vamsi_poondla
01-27 04:27 PM
Do you expect this forum to be pro-employer when most of them are for lack of better words were screwed by consultants? People and relationship are important. Also, what is put on paper matters. As a matter of goodwill why cant the employer strike off that clause? Nobody is serving here. Businesses make money, investing in people, products and services. Why would an employee be subject to such clause like withholding the compensation, if employer for valid reasons wants to separate from this company? Immigrants are cautious because of the environment. This has nothing to do with Indians or desis or any race.
When you sign a contract, it is always better to read it, validate with others, seek legal advice(if needed/available) and sign. Because contract has legal binding unless it violates any law.
Again, this could be a boiler plate clause, but not a clean clause like,
"If one doesn't want to choose medical coverage, company will pay 5K extra as bonus very year" ;)
Well, I read all the posts on this thread, they seem too cautious and pro employee. My advice to you is
1) People and relationships are more important than money. This is true only if the people are of high moral standard. If your company is going to teach you things (it is generally the case) then be receptive and serve them well. They might give you a raise. If they are prepared to invest in you, you should be prepared to invest in them. This will improve the image of indian workers.
2) The clause you are stating is not very bad. If you own a company and you teach your workers skills, you want something in return. You can avoid complications by making sure to clearly document what you already knew and what has been taught to you.
3) There are things called trade secrets. If the company teaches you these secrets you should not disclose it to others. Otherwise your ass is grass.
4) This is not the same as the 200,000$ bonded contract settlement precedent cited in the thread. It may not apply to your case. This is also not a legal forum. Pay 200$ consulting fees and talk to a lawyer and get advice. Don't loose sleep! and post that response here!!!!
We as immigrants tend to be too cautious. This is good, but it should not be in the way of good relationship with employers. Prepare for the worst and hope for the best!!!
When you sign a contract, it is always better to read it, validate with others, seek legal advice(if needed/available) and sign. Because contract has legal binding unless it violates any law.
Again, this could be a boiler plate clause, but not a clean clause like,
"If one doesn't want to choose medical coverage, company will pay 5K extra as bonus very year" ;)
Well, I read all the posts on this thread, they seem too cautious and pro employee. My advice to you is
1) People and relationships are more important than money. This is true only if the people are of high moral standard. If your company is going to teach you things (it is generally the case) then be receptive and serve them well. They might give you a raise. If they are prepared to invest in you, you should be prepared to invest in them. This will improve the image of indian workers.
2) The clause you are stating is not very bad. If you own a company and you teach your workers skills, you want something in return. You can avoid complications by making sure to clearly document what you already knew and what has been taught to you.
3) There are things called trade secrets. If the company teaches you these secrets you should not disclose it to others. Otherwise your ass is grass.
4) This is not the same as the 200,000$ bonded contract settlement precedent cited in the thread. It may not apply to your case. This is also not a legal forum. Pay 200$ consulting fees and talk to a lawyer and get advice. Don't loose sleep! and post that response here!!!!
We as immigrants tend to be too cautious. This is good, but it should not be in the way of good relationship with employers. Prepare for the worst and hope for the best!!!
sheela
02-21 08:45 AM
This is the most bizarre thing I ever heard w.r.to immigration. Usually the IO schedules an interview at one of the local offices or at one of the CBP (Customs and Border Patrol) offices. Atleast in San Francisco, both USCIS and CBP offices are located in the same building.
This happened to me and I may try to summarize my experience here. OP relax . PM me if you want to.
I Filed EB2i AOS in 07/07. Got a phone call at home (sometime in sep07). I was at work so my wife was the one who recd call and gave them my work ph#. Guy called at work, introduced himself and asked for time to visit me. We fixed up next morning . It was a kind of tense night. I had not informed my attorney about this- thinking it a part of background checks.
Next morning, an officer in plain bussiness dress showed up at exact time, introduced and gave me his bussiness card and presented his official ID card.
He spent some 45 minutes or so., and had several questions of personal nature about family and friends and money transmitted to india over the years (He had a complete list of transfers)
It was all serious questions but in a very casual/relaxed atmosphere (Nothing like allegations/judgemental).
This all ended very well. Saying GOOD LUCK to GREEN CARD.
Btw: I arrived in 2000 , worked for the same university until then.
This happened to me and I may try to summarize my experience here. OP relax . PM me if you want to.
I Filed EB2i AOS in 07/07. Got a phone call at home (sometime in sep07). I was at work so my wife was the one who recd call and gave them my work ph#. Guy called at work, introduced himself and asked for time to visit me. We fixed up next morning . It was a kind of tense night. I had not informed my attorney about this- thinking it a part of background checks.
Next morning, an officer in plain bussiness dress showed up at exact time, introduced and gave me his bussiness card and presented his official ID card.
He spent some 45 minutes or so., and had several questions of personal nature about family and friends and money transmitted to india over the years (He had a complete list of transfers)
It was all serious questions but in a very casual/relaxed atmosphere (Nothing like allegations/judgemental).
This all ended very well. Saying GOOD LUCK to GREEN CARD.
Btw: I arrived in 2000 , worked for the same university until then.
h1-b forever
01-13 09:11 AM
How much does the Transit visa cost?
0 comments:
Post a Comment